110 PCS Tap and Die Combination Set Tungsten Steel Titanium METRIC Tools withCase

110 PCS Tap and Die Combination Set Tungsten Steel Titanium METRIC Tools withCase
110 PCS Tap and Die Combination Set Tungsten Steel Titanium METRIC Tools withCase
110 PCS Tap and Die Combination Set Tungsten Steel Titanium METRIC Tools withCase
110 PCS Tap and Die Combination Set Tungsten Steel Titanium METRIC Tools withCase
110 PCS Tap and Die Combination Set Tungsten Steel Titanium METRIC Tools withCase
110 PCS Tap and Die Combination Set Tungsten Steel Titanium METRIC Tools withCase

110 PCS Tap and Die Combination Set Tungsten Steel Titanium METRIC Tools withCase
110-Piece Tap and Die Set. Our durable and reliable 110-piece tap and die set includes Metric coarse and fine sizes, super-hard & high-precision, and can offer you excellent performance in applications like machine tools, precision modules, transformers, etc. Tough Equipment & Tools, Pay Less. VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. Tungsten steel taps with high-hardness can stand high temperatures and corrosion durable enough for your long-lasting use. Fully ground tap is super-sharp enough to guarantee its smooth chip-removing & tapping without fracturing. A lock hole on dies is to ensure its double stability when screwing it on. An adjustable top wrench is for you to adjust tap size freely. The broad range of sizes and thread pitch, a total of 110 pieces to meet your different requirements. It is extensively used in many fields like machine tools, precision modules, transformers, etc. Sub-Type: ENGINEERING TAP AND DIE SET. Tap Holder: M2 - M12 (1/16" - 1/2").

Tap Holder: M6 - M20 (1/4" - 3/4"). Die Holder: Total length 200 mm (1 diameter bore). Die Holder: Total length 270 mm (1 1/2 diameter bore). Taper Taps: 35pcs (M2 x 0.4, M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 0.75, M6 x 1, M7 x 0.75, M7 x 1, M8 x 0.75, M8 x 1, M8 x 1.25, M9 x 0.75, M9 x 1, M9 x 1.25, M10 x 0.75, M10 x 1, M10 x 1.25, M10 x 1.5, M11 x 0.75, M11 x 1, M11 x 1.25, M11 x 1.5, M12 x 0.75, M12 x 1, M12 x 1.25, M12 x 1.5, M12 x 1.75, M14 x 1, M14 x 1.25, M14 x 1.5, M14 x 2, M16 x 1, M16 x 1.5, M16 x 2, M18 x 1.5).

Plug Taps: 35pcs (M2 x 0.4, M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 0.75, M6 x 1, M7 x 0.75, M7 x 1, M8 x 0.75, M8 x 1, M8 x 1.25, M9 x 0.75, M9 x 1, M9 x 1.25, M10 x 0.75, M10 x 1, M10 x 1.25, M10 x 1.5, M11 x 0.75, M11 x 1, M11 x 1.25, M11 x 1.5, M12 x 0.75, M12 x 1, M12 x 1.25, M12 x 1.5, M12 x 1.75, M14 x 1, M14 x 1.25, M14 x 1.5, M14 x 2, M16 x 1, M16 x 1.5, M16 x 2, M18 x 1.5). Dies: 35pcs (M2 x 0.4, M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 0.75, M6 x 1, M7 x 0.75, M7 x 1, M8 x 0.75, M8 x 1, M8 x 1.25, M9 x 0.75, M9 x 1, M9 x 1.25, M10 x 0.75, M10 x 1, M10 x 1.25, M10 x 1.5, M11 x 0.75, M11 x 1, M11 x 1.25, M11 x 1.5, M12 x 0.75, M12 x 1, M12 x 1.25, M12 x 1.5, M12 x 1.75, M14 x 1, M14 x 1.25, M14 x 1.5, M14 x 2, M16 x 1, M16 x 1.5, M16 x 2, M18 x 1.5).

2 x Tap holders (different size). 1 x T- bar tap wrench. 2 x Die holder (different size). 1 x Portable Storage Case.

High-duty heat-treated Tungsten steel construction, high-hardness, wear-resistant, and its service life is 5-10 times longer than that of non-tungsten taps, durable and reliable for your long-lasting use. Fully ground & high-precision tap is super-sharp for your tapping and chip removing operation, running smooth and efficient, offering you excellent performance.

Each dies is designed with a lock hole, it can be locked tightly after the screw is aligned and locked, ensures double stability during your operation. Tap wrench is adjustable: you can set the adjustable basin wrench to either its position for turning clockwise (tightening) or turning anti-clockwise (loosening). You can do this by flipping the jaws 180 degrees over its pivot. This tap and die set comes with 110 pieces in total: 35 pcs plug taps, 35 pieces taper taps, 35 pcs dies, 2 tap holdersM2 - M12 1/16" - 1/2"& M6 - M20 (1/4" - 3/4"), 2 die holders 200mm (1" diameter bore)& 270 mm (1 1/2" diameter bore) and 1 T-bar tap wrench, most popular sizes included.

All items will be checked carefully and packages in good condition. Address must be in English.

Russian customers must provide their full name. (First, middle and last name).

Thank you for your understanding. We will try to solve any dispute and try our best to satisfy, if you are not satisfying our product, please contact first.

Please contact your custom office for charges if you're not sure. Our goal is to provide high quality products with competitive prices and excellent customer service to our buyers. We will work with you until you are satisfied. We sincerely hope that you can. Please give us the opportunity to resolve any problems. We will try our best to solve any dispute and satisfy our customers. This item is in the category "Home & Garden\Tools & Workshop Equipment\Hand Tools\Taps & Dies". The seller is "shagunaw_92" and is located in this country: US. This item can be shipped worldwide.
110 PCS Tap and Die Combination Set Tungsten Steel Titanium METRIC Tools withCase


Tap And Die Set   Links   Contact Us   Privacy Policy   Terms of Use