110 Piece Combination Tap and Die Set Alloy Steel 55°- 60° Metric

110 Piece Combination Tap and Die Set Alloy Steel 55°- 60° Metric. Tap sizes: 4x0.7, 5x0.8, 7x1/0.75, 8x1.25/1/0.75, 9x0.75/1/1.25, 10x0.75/ 1/1.25/1.5, 11x0.75/1/1.25/1.5, 12x 0.75/1/1.25/1.5/1.75, 14 x1,16x1/1.5/2, 18x1.5, 14 x 2/1.5/1.25.

M3x0.5, M4x0.7, M6x0.75, M6x1, M7x0.75, M7x1, M8x0.75, M8x1, M8x1.25, M9x0.75, M9x1, M9x1.25, M10x0.75, M10x1, M10x1.5, M10x1.75, M11x0.75, M11x1, M11X1.25, M11x1.5, M12X0.75, M12x1. Die Sizes: M12x1.25, M12x1.5, M12x1.75, M14x1, M14x1.25, M14x1.5, M14x2, M16x1, M16x1.5, M16x2, M18x1.52. 35 Plug Taps:Size as taper taps. 35 Dies:Size as taps. 2 Tap wrench:M3-M12, M6-M20.

1 Die Holder:25mm, 38mm O/D. 2 x 0.4, 3 x 0.5, 4 x 0.7, 5 x 0.8, 6 x 7.5. 6 x 1, 7 x 0.75, 7 x 1, 8 x 0.75, 8 x 1.

8 x 1.25, 9 x 0.75, 9 x 1, 9 x 1.25, 10 x 0.75. 10 x 1, 10 x 1.25, 10 x 1.5, 11 x 0.75, 11 x 1. 11 x 1.25, 11 x 1.5, 12 x 0.75, 12 x 1, 12 x 1.25. 12 x 1.5, 12 x 1.75, 14 x 1, 14 x 1.25, 14 x 1.5. 14 x 2, 16 x 1, 16 x 1.5, 16 x 2, 18 x 1.5. 35 x Plug Taps:Size as Taper Taps. 35 x Dies:Size as Taps. 2 x Tap Wrench:M3-M12, M6-M20. 1 x Die Holder:25mm, 38mm O/D.

1 x T-Type Tap Wrench:M3-M6. 1 x 3 Sets / Carton Size:46.5 x 35.5 x 21cm. Size:18 x 13 x 2.5inch / 45 x33.5 x 6.5cm.

Weight:14.3lb / 6.5kg. Material upgrading:Alloy Steel 55°- 60°, Sizes Stamped Engraved-etched On the Metal. 35 Taper Taps + 35 Plug Taps + 35 Dies + 2 Tap Wrench M3-M12, M6-M20 + Die Wrench 25mm, 38mm O/D + 1 T-Type Tap Wrench M3-M6 + 2 Antiskid Gloves.