110PCS Tap And Die Metric Tools Set Case Carbon Tool Box Tungsten Master USA

These tapered plug taps and dies are the most commonly used style. We can use them to cut new material or chase lightly damaged threads. These taps and dies will cut mild carbon and alloy steel, stainless steel, cast iron, aluminum, brass, and bronze.

The taps and die set is made of carbon steel. Thus, we can use it to cut new material or repair damaged thread for a long time.

It can provide high working efficiency and save time for us. The threading die set includes 60 / 86 / 110 pieces of taps and dies. The broad range of sizes and thread pitch, a total of 60 / 86 / 110 pieces to meet your different requirements. We could use the high-intensity carbon steel die set in high-temperature conditions.

So we can use it for a long time. The superior quality can meet your various demands in many situations. The metric tap and die set are stocked in the case, keeping them tidy and in order. The case also can protect the threading tool from dirty.

So it can save your time to clean the tap and die set. You can adjust the size of the tap and die set by using the adjustable wrench. Thus, you can use it to fulfill many different working tasks. We can use the carbon steel re-threading tool kit in multiple areas, such as machine tools, precision modules, voltage transformers, etc.

60PCS Tap & Die Set. 3x0.5, 4x0.7, 5x0.8, 6x1, 7x1.0, 8x1.25, 9x1.25, 10x1, 10x1.5, 12x1.75, 4-40, 6-32, 8-32, 10-32, 10-24, 12-24, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20, 1/8-27. 27 Dies(Inch): 3x0.5, 4x0.7, 5x0.8, 6x1, 7x1.0, 8x1.25, 9x1.25, 10x1, 10x1.5, 12x1.75, 4-40, 6-32, 8-32, 10-32, 10-24, 12-24, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20, 1/8-27. Master Carton Quantity: 6 Sets.

Master Carton Measure(L x W x H): 43.5 x 24.5 x 5 cm/17.13 x 9.65 x 1.97 in. W: 17 kg/37.48 lbs. 1 x T-type Tap Wrench.

2 x Screw Pitch Gauge. 86PCS Tap & Die Set.

1/8"-27NPT, 4-40, 6-32, 8-32, 10-32, 10-24, 12-24, 1/4"-20, 1/4"-28, 5/16"-18, 5/16-24, 3/8"-16,3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18. METRIC TAP SIZES: M3-0.5, M 4-0.7, M 5-0.8, M 6-1.0, M 7-1.0, M 8-1.0, M 8-1.25, M 9-1.25, M 10-1.5, M 10-1.25, M 11-1.5, M 11-1.25, M 12-1.75, M 12-1.5, M 14-2, M 14-1.5, M 16-2, M16-1.5.

Tap And Die set: Titanium. 1 x Adjustable Tap Wrench (M6 to M20 - 1/4" to 3/4"). 1 x Long Handle Adjustable Tap Wrench (M3 to M12 - 1/16" to 1/2").

1 x T-Handle Tap Wrench. 1 x Die Handle (M25 - 1). 1 x Long Die Handle (M38 - 1-1/2). 1 x Screw Pitch Gauge Metric + 1 x Screw Pitch Gauge SAE. 110PCS Tap & Die Set.

Sub-Type: ENGINEERING TAP AND DIE SET. Tap Holder: M2 - M12 (1/16" - 1/2"). Tap Holder: M6 - M20 (1/4" - 3/4").

Die Holder: Total length 200 mm (1 diameter bore). Die Holder: Total length 270 mm (1 1/2 diameter bore). M2 x 0.4, M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 0.75, M6 x 1, M7 x 0.75, M7 x 1, M8 x 0.75, M8 x 1, M8 x 1.25, M9 x 0.75, M9 x 1, M9 x 1.25, M10 x 0.75, M10 x 1, M10 x 1.25, M10 x 1.5, M11 x 0.75, M11 x 1, M11 x 1.25, M11 x 1.5, M12 x 0.75, M12 x 1, M12 x 1.25, M12 x 1.5, M12 x 1.75, M14 x 1, M14 x 1.25, M14 x 1.5, M14 x 2, M16 x 1, M16 x 1.5, M16 x 2, M18 x 1.5. 2 x Tap holders (different size).

1 x T- bar tap wrench. 2 x Die holder (different size).

1 x Portable Storage Case. The tap and die set metric and standard are entirely machined. Thus, it's very sharp and will not damage during cutting a new thread or repairing the old one.

The whole set passed the heat treatment precisely and is widely-used size. The sae die set made of high-durability carbon steel, which is anti-wear.

Its longevity is 5-10 times that of non-carbon steel die set. It's quite robust, which ensures that we can use it for a long time.

The case can contain the full tap and die set. You can bring it to the place where you need it. And it's convenient to store them in the case to prevent dust.

We can set the wrench at the location of clockwise rotation or anti-clockwise rotation. We can rotate the clamp at 180° to make it. It's very convenient to use.

The large tap and die set can work on most metals, such as carbon steel, iron, aluminum, brass, copper, stainless steel, etc. We can use it to make a new thread or repair the old one.

Where quality and exceptional service are our top priorities. We are dedicated to providing you with a seamless and enjoyable shopping experience from start to finish.

With our handpicked selection of high-quality products, we ensure that each item meets our stringent standards for craftsmanship and durability. These charges are the buyers responsibility.

We will reply in less than 24 hours.