39 Pc SAE & Metric Tap & Die Set DIY Tapered & Plug Hand Tapping & Threading Kit

39 Piece SAE & Metric Tap and Die Set. DIY Tapered & Plug Hand Tapping, Cutting, Threading, Forming, & Chasing Kit for the Garage & Workshop. TAPPING/CUTTING, THREADING/FORMING & CHASING: Straightforward DIY hand tapping, threading, and chasing with clean-cut results for DIY jobs in garages, and workshops. Most common SAE and Metric sizes make sure you stay covered.

Milled from high quality alloy steel these taps and dies, with accurate usage and cutting oils, will tap and thread typical metals such as carbon and alloy steel, cast iron, aluminum, brass and bronze. Start tapping easily, either cutting new material or chasing lightly damaged threads e. Old screws, spark plugs, rust affected nuts and bolts.

Extra Accessories: The Tap & Die set includes extra accessories for tool preparations and measurement. 16-Blade Screw Pitch Gauge to quickly measure the pitch or lead of a screw thread; 13 to 40 TPI SAE; 0.5 to 1.75 Metric; Mini-Screwdriver to assemble and fix the dies into the turning wrench.

17 Piece Tapered & Plug Taps: Three and four flute plug taps with tapered coarse and fine threads. The tapered cutting edges assist in aligning and starting the tap into an untapped hole. A high carbon chromium bearing steel with high hardness, high contact fatigue performance, and good wear and corrosion resistance; 8 x Taper Taps - SAE: #4-40, #6-32, #8-32, 1/4-20, Metric: M3x0.5, M4x0.7, M5x0.8, M6X1.0; 9 x Plug Taps: SAE: 5/16-18, 3/8-16, 7/16-14, 1/2-13, NPT tap (1/8-27), Metric: M7x1.0, M8x1.25, M10x1.5, M12x1.75. 17 Piece Dies: Dies to cut or form matching screws and bolts.

A high carbon chromium bearing steel with high hardness, high contact fatigue performance, and good wear and corrosion resistance; 17 x Dies: SAE: #4-40, #6-32, #8-32, 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13, 1/8-27(NPT), Metric: M3x0.5, M4x0.7, M5x0.8, M6X1.0, M7x1.0, M8x1.25, M10x1.5, M12x1.75. T-Handle Tap Wrench: For the smaller taps.

6cm / 2-3/8 long; Nickel-plated #45 Carbon Steel Body; With knurled tightening ring. Adjustable Tap Wrench Handle: For the larger taps. M3 to M12 & 1/16 to 1/2"; 19.5cm / 7-11/16" long; Zinc alloy body, carbon steel holding blocks, A3 steel chrome-plated handles.

Die Wrench Handle: For turning the dies. M25 / 1"; 20.0cm / 7-7/8" long; Zinc alloy body, carbon steel holding blocks, A3 steel chrome-plated handles. CLEAN CUT RESULTS: Start straightforward DIY hand tapping, threading, and chasing with the SAE & Metric Tap and Die Tool Set.

Cut new material or chase lightly damaged threads and recover old screws, rusty nuts and bolts, and spark plugs. Complete in a toolbox tray case. 34 PIECE SAE & METRIC TAP & DIES: Most popular thread sizes, threads per inch and pitches of three and four flute tapered and plugged taps, and dies. 9 x SAE Taps: #4 to 1/2in; 1 x NPT tap: (1/8-27); 8 x Metric Taps: M3 to M12.

9 x SAE Dies: #4 to 1/2in; 1 x NPT die: 1/8-27(NPT); 8 x Metric Dies: M3 to M12. METAL RULES: With taps and dies made from GCr15 Alloy steel, a high carbon chromium bearing steel with high hardness, high contact fatigue performance, and good wear and corrosion resistance, the Tap and Die Set will tap and thread typical metals such as carbon alloy steel, cast iron, aluminum, brass and bronze. THREADING/FORMING & CHASING: Clean up old, broken and damaged threads with The Tap and Die Set. The taps cut internal threads and dies cut external thread with their coarse and fine threads.

Use these cutting tools with cutting oils for the quickest and most efficient way of adding a screw thread to a work piece. ACCESSORIES & STORAGE CASE: 3 x Tap and Die Wrench handles with steel alloy bodies and adjustable fittings for turning the taps and dies. 16-Blade Screw Pitch Gauge to quickly measure the pitch or lead of a screw thread. Mini-Screwdriver to assemble and fix the dies into the turning wrench. In a slim line case for easy access and packing in a tool box or storage on a shelf.

This item is in the category "Home & Garden\Tools & Workshop Equipment\Hand Tools\Taps & Dies". The seller is "ahusketh" and is located in this country: US. This item can be shipped to United States.

Model: 39 Piece SAE and Metric Tap & Die Set
Country/Region of Manufacture: Unknown
Custom Bundle: No
Item Height: 1.46 in
Item Width: 7.87 in
Material: GCr15 Alloy Steel
Number of Pieces: 39
Type: Tap & Die Set
Color: Silver and Blue
System of Measurement: SAE and Metric
MPN: DT30087-USA
Item Length: 12.4 in
Item Weight: 3.04 lbs
Brand: Hi-Spec Products
Item Diameter: 12.4 in
UPC: 884540010350