51-Pc 1/4-20 to 1-14 Jumbo Tap and Die Set SAE round Threading Dies for Threadin

51-Pc 1/4-20 to 1-14 Jumbo Tap and Die Set SAE round Threading Dies for Threading and Rethreading Internal and External Threads. We always give the best to our customers, before and after sale. All of our products are of high quality and selected from the best suppliers and wharehouse. We will work together to find a suitable solution. We belive that mutual trust and collaborative work can solve any problem.

We are at your disposal. Taps & dies sizes: 1/4-20 NC, 1/4-28 NF, 5/16-18 NC, 5/16-24 NF, 3/8-16 NC, 3/8-24 NF, 7/16-14 NC, 7/16-20 NF, 1/2-13 NC, 1/2-20 NF, 9/16-12 NC, 9/16-18 NF, 5/8-11 NC, 5/8-18 NF, 3/4-10 NC, 3/4-16 NF, 7/8-9 NC, 7/8-14 NF, 1-8 NC, 1-14 NF.

Set includes T-handle tap wrench, tap wrench, die wrench with(1-1/2'' o/d)adapter, flat screwdriver, centre punch and spiral flute extractors(3mm to 18mm). Suit for efficient clean cutting of internal and external threads. Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel. Each tap and die in this set is constructed of long-lasting alloy steel for maximum durability.

Hardened, precision-ground and polished carbon steel surfaces make chip removal easy. All cutting teeth are precisely machined to Rockwell hardness 60 HRC for best threading performance. Rust-resistant satin finish for smooth cuts with less friction. 1/4"-20 NC, 5/16"-18 NC, 3/8"-16 NC, 7/16"-14 NC, 1/2"-13 NC, 9/16"-12 NC, 5/8"-11 NC, 3/4"-10 NC, 7/8"-9 NC, 1"-8 NC. 1/4"-28 NF, 5/16"-24 NF, 3/8"-24 NF, 7/16"-20 NF, 1/2"-20 NF, 9/16"-18 NF, 5/8"-18 NF, 3/4"-16 NF, 7/8"-14 NF, 1"-14 NF.

1 x Tap Wrench, 1 x T-Handle Tap Wrench, 1 x Die Wrench with (1-1/2)Adapter, 1 x Screwdriver, 1 x Auto Center Punch, 20 x Taps, 20 x Dies, 5 x Spiral Flute Extractors. 31-Pc 2 in 1 Metric Tap and Die Set. 70 Pc Metric and SAE Tap and Dies Set. 75 Pc Metric and SAE Tap and Dies Set. 51 Pc Metric Tap and Dies Set.

51 Pc SAE Tap and Dies Set. M3 to M12, 4-40 to 1/2-20. 1 x 2 in 1 Tap and Die Holder, 15 x Taps, 15 x Dies. 1 x Tap Wrench, 1 x T-Handle Tap Wrench, 1 x Die Wrench, 1 x Screwdriver, 2 x Screw Pitch Gauge(Inch&Machine), 27 x Taps, 27 x Dies, 5 x Spiral Flute Extractors, 5 x Drill Bits.

1 x Tap Wrench, 2 x T-Handle Tap Wrench, 1 x Die Wrench, 1 x Screwdriver, 2 x Screw Pitch Gauge(SAE&Metric), 34 x Taps, 34 x Dies. 20 X Tap, 20 X Dies, 1 X Tap Wrench, 1 X T Handle Tap Wrench, 1 X Die Wrench, 1 X Adapter, 1 X Screwdriver, 1 X Auto Center Punch, 5 X Spiral Flute Extractors. 1/4-20 to 1-14, 51 Pc. 16.3 x 11.3 x 3 inches.