51-Pc 1/4-20 to 1-14 Jumbo Tap and Die Set SAE round Threading Dies for Threadin

51-Pc 1/4-20 to 1-14 Jumbo Tap and Die Set SAE round Threading Dies for Threading and Rethreading Internal and External Threads. Taps & dies sizes: 1/4-20 NC, 1/4-28 NF, 5/16-18 NC, 5/16-24 NF, 3/8-16 NC, 3/8-24 NF, 7/16-14 NC, 7/16-20 NF, 1/2-13 NC, 1/2-20 NF, 9/16-12 NC, 9/16-18 NF, 5/8-11 NC, 5/8-18 NF, 3/4-10 NC, 3/4-16 NF, 7/8-9 NC, 7/8-14 NF, 1-8 NC, 1-14 NF. Set includes T-handle tap wrench, tap wrench, die wrench with(1-1/2'' o/d)adapter, flat screwdriver, centre punch and spiral flute extractors(3mm to 18mm). Suit for efficient clean cutting of internal and external threads. Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel.

Each tap and die in this set is constructed of long-lasting alloy steel for maximum durability. Hardened, precision-ground and polished carbon steel surfaces make chip removal easy. All cutting teeth are precisely machined to Rockwell hardness 60 HRC for best threading performance. Rust-resistant satin finish for smooth cuts with less friction.

1/4"-20 NC, 5/16"-18 NC, 3/8"-16 NC, 7/16"-14 NC, 1/2"-13 NC, 9/16"-12 NC, 5/8"-11 NC, 3/4"-10 NC, 7/8"-9 NC, 1"-8 NC. 1/4"-28 NF, 5/16"-24 NF, 3/8"-24 NF, 7/16"-20 NF, 1/2"-20 NF, 9/16"-18 NF, 5/8"-18 NF, 3/4"-16 NF, 7/8"-14 NF, 1"-14 NF.

1 x Tap Wrench, 1 x T-Handle Tap Wrench, 1 x Die Wrench with (1-1/2)Adapter, 1 x Screwdriver, 1 x Auto Center Punch, 20 x Taps, 20 x Dies, 5 x Spiral Flute Extractors. 1/4-20 to 1-14, 51 Pc.

16.3 x 11.3 x 3 inches. Product Dimensions: 11.3 inches x 16.3 inches x 3.0 inches. We reserve the right to cancel any order for any reason at any time. We are not responsible for undeliverable addresses. All of our items, unless otherwise stated, will only run on 120 volts.

Please check to make sure your country complies with these specifications. We will work with you to resolve any problem you may have.