75-Pc Tap and Die Set, SAE & Metric Hex Thread Taps Dies Wrench Metric Sizes M3

75-Pc Tap and Die Set, SAE & Metric Hex Thread Taps Dies Wrench Metric Sizes M3 to M12 & Standard Sizes #4 to 1/2 Type NC NF NPT. Metric taps & dies sizes: M3x0.5, M3x0.6, M4x0.7, M4x0.75, M5x0.8, M5x0.9, M6x1.0, M7×1.0, M8x1.25, M9x1.0, M9x1.25, M10x1.25, M10x1.5, M11x1.5, M12x1.5, M12x1.75. SAE taps & dies sizes: 4-40 NC, 6-32 NC, 8-32 NC, 10-32 NF, 10-24 NC, 12-24 NC, 1/4-20 NC, 1/4-28 NF, 5/16-18 NC, 5/16-24 NF, 3/8-16 NC, 3/8-24 NF, 7/16-14 NC, 7/16-20 NF, 1/2-13 NC, 1/2-20 NF, 1/8-28 BSP, 1/8-27 NPT. Set includes tap wrench, T-handle tap wrench(2 piece), die wrench, screwdriver, thread pitch gauge(SAE & Metric). Suit for efficient clean cutting of internal and external threads. Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel. Each tap and die in this set is constructed of long-lasting alloy steel for maximum durability. Hardened, precision-ground and polished carbon steel surfaces make chip removal easy. All cutting teeth are precisely machined to Rockwell hardness 60 HRC for best threading performance. Rust-resistant satin finish for smooth cuts with less friction. M3x0.5, M3x0.6, M4x0.7, M4x0.75, M5x0.8, M5x0.9, M6x1.0, M7×1.0, M8x1.25, M9x1.0, M9x1.25, M10x1.25, M10x1.5, M11x1.5, M12x1.5, M12x1.75. 4-40 NC, 6-32NC, 8-32 NC, 10-24 NC, 12-24 NC, 1/4"-20 NC, 5/16"-18 NC, 3/8"-16 NC, 7/16"-14 NC, 1/2-13 NC. 10-32 NF, 1/4"-28 NF, 5/16"-24 NF, 3/8"-24 NF, 7/16"-20 NF, 1/2-20 NF.

34 x Taps, 34 x Dies, 1 x Tap Wrench, 2 x T-Handle Tap Wrench, 1 x Die Wrench, 1 x Screwdriver, 2 x Thread Pitch Gauge(SAE&Metric). 31-Pc 2 in 1 Metric Tap and Die Set. 70 Pc Metric and SAE Tap and Dies Set.

75 Pc Metric and SAE Tap and Dies Set. 51 Pc Metric Tap and Dies Set.

51 Pc SAE Tap and Dies Set. M3 to M12,4-40 to 1/2-20.

M3 to M12, 4-40 to 1/2-20. 1 x 2 in 1 Tap and Die Holder, 15 x Taps, 15 x Dies. 1 x Tap Wrench, 1 x T-Handle Tap Wrench, 1 x Die Wrench, 1 x Screwdriver, 2 x Screw Pitch Gauge(Inch&Machine), 27 x Taps, 27 x Dies, 5 x Spiral Flute Extractors, 5 x Drill Bits.

1 x Tap Wrench, 2 x T-Handle Tap Wrench, 1 x Die Wrench, 1 x Screwdriver, 2 x Screw Pitch Gauge(SAE&Metric), 34 x Taps, 34 x Dies. 20 X Tap, 20 X Dies, 1 X Tap Wrench, 1 X T Handle Tap Wrench, 1 X Die Wrench, 1 X Adapter, 1 X Screwdriver, 1 X Auto Center Punch, 5 X Spiral Flute Extractors.

16.93 x 10.04 x 3.07 inches. But keep in mind that some orders could take longer for events out of our controls, like logistic problems.

We reserve the right to cancel any order for any reason at any time. We are not responsible for undeliverable addresses, and we can cancel orders direct to some addresses where the courier or our warehouses could get potential problems. Please send us a message and give us the opportunity to help you. Your feedback very important to us, after you get your package and you are.

Thank you for shopping at our store.