77 Piece Sae/Metric Ratcheting Tap and Die Set -3887

77 Piece Sae/Metric Ratcheting Tap and Die Set -3887. 34 Hex Dies: 4 x 40, 6 x 32, 8 x 32, 10 x 24, 10 x 32, 12 x 24, 1/4 x 20, 1/4 x 28, 5/16 x 18, 5/16 x 24, 3/8 x 16, 3/8 x 24, 7/16 x 14, 7/16 x 20, 1/2 x 13, 3mm x 0.50, 3mm x 0.60, 4mm x 0.70, 4mm x 0.75, 5mm x 0.80, 5mm x 0.90, 6mm x 1.00, 7mm x 1.00, 8mm x 1.25, 9mm x 1.00, 9mm x 1.25, 10mm x 1.25, x 10mm x 1.50, 11mm x 1.50, 12mm x 1.50, 12mm x 1.75, 1/8 -28, 1/8 -27, (1) Medium ratcheting T-wrench (2) Tap Adapters - Small and Medium (1) Medium Hex Die Adapter (1) Sliding Handle for Tap Adapter (1) 4mm hex key (2) Thread pitch gauges - SAE and Metric (1) Hex die spacer, (18) Taper Taps: 4 x 40, 6 x 32, 8 x 32, 10 x 24, 10 x 32, 12 x 24, 1/4 x 20, 1/4 x 28, 5/16 x 18, 5/16 x 24, 3mm x 0.50, 3mm x 0.60, 4mm x 0.70, 4mm x 0.75, 5mm x 0.80, 5mm x 0.90, 6mm x 1.00, 7mm x 1.00 (14) Plug Taps: 3/8 x 16, 3/8 x 24, 7/16 x 14, 7/16 x 20, 1/2 x 13, 1/2 x 20, 8mm x 1.25, 9mm x 1.00, 9mm x 1.25, 10mm x 1.25, 10mm x 1.50, 11mm x 1.50, 12 x 1.50, 12mm x 1.75 (2) Pipe Taps: 1/8 -28 and 1/8 - 27. 17 x 10 x 2 inches. Die adapter works on round and hex shaped dies. Ratcheting T-handles wind dies with a 5° swing arc and have a reversing lever to eliminate hand-over-hand turning.

Twist Lock guide system reduces the "walk back" of the die guide and keeps the dies centered while cutting. GEARWRENCH Ratcheting Tap & Die Sets. GEARWRENCH has taken the ratcheting wrench design and applied it to the tap & die.

The ratcheting handles and adapters allow for easy back and forth movement required while cutting threads on either taps or dies. The 5° ratcheting arc with reversing lever eliminates hand over hand turning. The GEARWRENCH ratcheting T wrench utilizes a 5° ratcheting arc to eliminate hand over hand turning allowing you to get the job done more quickly. GEARWRENCH offers both taper and plug taps in our ratcheting tap & die sets allowing the user to have the proper tools at the right time.

1 Large & 1 Medium. 3 Tap, 2 Die, 2 Extension.

2 Tap & 1 Die. 1 Tap & 1 Die. 4-40 to 1/2 & 3mm to 12mm. The GEARWRENCH ratcheting T wrenches are available in 2 sizes - medium & large.

Our twist lock guide system reduces the chance for'walk back' of the die guard. Die adapters work on round and hex shaped dies and also fully integrate with our Pass-Thru ratchet and socket system. You can also extend the length of any of the GEARWRENCH taps and dies by combining the adapters with any standard 3/8 In.

We offer the best prices around on high quality products. Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more. We are always working hard to ensure your package arrives as soon as possible.

We do not accept P. Please provide a physical address. We try our very best to make sure every customer is completely satisfied. If there's a problem, message us! We're happy to help.