80pc Professional SAE & Metric Tap and Die Set T-Handle Wrench Screw Pitch Gauge

80pc Professional SAE & Metric Tap and Die Set T-Handle Wrench Screw Pitch Gauge
80pc Professional SAE & Metric Tap and Die Set T-Handle Wrench Screw Pitch Gauge
80pc Professional SAE & Metric Tap and Die Set T-Handle Wrench Screw Pitch Gauge
80pc Professional SAE & Metric Tap and Die Set T-Handle Wrench Screw Pitch Gauge
80pc Professional SAE & Metric Tap and Die Set T-Handle Wrench Screw Pitch Gauge

80pc Professional SAE & Metric Tap and Die Set T-Handle Wrench Screw Pitch Gauge

80pc Professional SAE & Metric Tap and Die Set T-Handle Wrench Screw Pitch Gauge. Click an Image to Enlarge.

NEW 80pc Professional SAE and Metric Tap and Die Set. Taps and dies are cutting tools used to create screw threads. A tap cuts a thread on the inside surface of a hole, creating a female surface which functions like a nut. The die cuts a thread on a preformed cylindrical rod, which creates a male threaded piece which functions like a bolt. Both tools can be used to clean up a thread, which is called chasing.

80pc Professional SAE and Metric Tap and Die Set with Tap Wrench and T-Handle Wrench. SAE Taps & Hexagon Die with Thread-Pitch range from 4-40 to 1/2-20. Metric Taps & Hexagon Die from M3 to M12 with Thread-Pitch from 0.5mm to 1.75mm. Includes Both Fine & Coarse Threaded Taps & Dies in Imperial and Metric Sizing.

Professional Grade Set in Special Fine Carbon Steel For Excellent Strength. Includes: Adjustable & T-Handle Tap Wrenches, Adjustable Die Wrench. Measurement System: SAE and Metric. Thread Type: NC, NF, NPT. 2x Adjustable Tap Wrench (1/8 NPT-27).

34x Taps and Dies SAE Thread Sizes. 4 x 40, 6 x 32, 8 x 32, 10 x 32, 10 x 24, 12 x 24, 1/4" x 20, 1/4" x 28, 5/16" x 18, 5/16" x 24, 3/8" x 16, 3/8" x 24, 7/16" x 14, 7/16" x 20, 1/2" x 13, 1/2" x 20, 1/8 NPT-27. 34x Taps and Dies Metric Thread Sizes.

M3 x 0.5mm, M3 x 0.6mm, M4 x 0.7mm, M4 x 0.75mm, M5 x 0.8mm, M5 x 0.9mm, M6 x 0.75mm, M6 x 1.0mm, M7 x 0.75mm, M8 x 1.0mm, M8 x 1.0mm, M8 x 1.25mm, M10 x 1.25mm, M10 x 1.5mm, M12 x 1.5mm, M12 x 1.75mm, 1/8 NPT-27. They do not sponsor or endorse our materials. This Product is intended for off-road use only. We cannot be held liable if the product is used in conjunction with any vehicle on U. Or Canadian roads or highways or in any other jurisdiction where the Product would not meet safety or emission standards, as specified by that jurisdiction.

The item "80pc Professional SAE & Metric Tap and Die Set T-Handle Wrench Screw Pitch Gauge" is in sale since Friday, May 29, 2015. This item is in the category "Home & Garden\Tools\Hand Tools\Taps & Dies". The seller is "2wheelproject" and is located in Buffalo/Toronto. This item can be shipped to United States, to Canada.


80pc Professional SAE & Metric Tap and Die Set T-Handle Wrench Screw Pitch Gauge


Tap And Die Set   Links   Contact Us   Privacy Policy   Terms of Use