86PC Tap And Die Combination Set Tungsten Steel Titanium SAE METRIC Tools HQ

New 86pc Tap and Die combination set tungsten steel titanium SAE AND METRIC Tools. The new 86pc Tap and Die Tools are precision machined. The tap and Die are designed to. Thread cutting: tap is used to process internal thread, while the die is for external. To cut an internal thread, select the tap of the desired size, tap wrench, proper drill.

Size or hole size, and lubricating or cutting oil. The proper hole size is very important. In the formation of good threads.

An oversized hole results in reduced thread height, an. Undersized hole will overload the tap and cause undue breakage. Drill size permanently marked on the end of each tap and drill the hole to desired depth. Secure tap by the square in the tap wrench and start threads by turning clockwise. Care must be taken to start the tap square to the hole.

As the tap is turned, it bites. Into the metal and leads into the hole. After the tap has been started, metal chips that.

Flow into the flute spaces must be broken to relieve pressure on the tap. This is accomplished by reversing the tap direction every 1/4 to 1/2 revolution depending.

On the tightness encountered providing lubrication to the cutting edges while tapping. Will result in smoother threads and longer tap life. Continue threading until the tap.

Passes through the part or to the desired depth. When tapping a blind hole one that does.

Not pass entirely through the part take care in drilling to provide clearance at the. Bottom for chips and the starter threads. These chamfered threads on the end of the tap. Will not cut full threads. This set of taps are designed for general use.

With 3 to 5 chamfered threads. BOTTOMING taps with 1 to 1 chamfered threads for tapping to. The bottom of a blind hole. TAPER taps with 8 to 10 chamfered threads for easiest. Starting are also available but are not needed by the average user.

To cut an external thread, such as on a bolt, select the correct die for the rod being. Threaded, die stock, and lubricating or cutting oil. Size of the rod or bolt, is of great. It must be no larger than the desired thread, and preferably 005" to 010".

Oversized work may damage the die and will make turning very difficult. Slightly undersized work is easier to thread and furnishes enough thread height for. After securing the part being threaded, insert the die into the die stock and. Run the screw snugly into one of the recesses in the outside surface of the die.

Recess and slot pattern of dies allows use with a variety of die stocks. The chamfered side of the die is used for starting the threading operation. The end of the piece to be threaded to make angles starting easier. Chamfer also helps in starting at right to the work which is of great importance.

The die on the rod with clockwise rotation until it begins cutting onto the work piece. Chips will flow into the holes provided and should be broken by reversing the action.

Every 1/4 to 1/2 turn depending upon tightness encountered. Threads of the desired length have been cut. SAE TAP SIZES:1/8"-27NPT, 4-40, 6-32, 8-32, 10-32, 10-24, 12-24, 1/4"-20, 1/4"-28, 5/16"-18, 5/16-24. 3/8"-16,3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8-11. 1/8"-27NPT, 4-40, 6-32, 8-32, 10-32, 10-24, 12-24, 1/4"-20, 1/4"-28, 5/16"-18, 5/16-24. METRIC TAP SIZES M3-0.5, M 4-0.7, M 5-0.8, M 6-1.0, M 7-1.0, M 8-1.0, M 8-1.25, M 9-1.25. M 10-1.5, M 10-1.25, M 11-1.5, M 11-1.25, M 12-1.75, M 12-1.5, M 14-2, M 14-1.5, M 16-2. METRIC DIE SIZES M 3-0.5, M 4-0.7, M 5-0.8, M 6-1.0, M 7-1.0, M 8-1.0, M 8-1.25, M 9.

1.25, M 10-1.5, M 10-1.25, M 11-1.5, M 11-1.25, M 12-1.75, M 12-1.5, M 14-2, M 14-1.5, M. Heavy duty heat-treated tungsten steel construction. Precision machined to exacting standards. Precision ground and polished surfaces to facilitate chip removal.

Tap And Die set: Titanium. Net Weight: 5.9928kg (13.2lbs).

Volumetric Weight: 1.57717kg (3.473942lbs). 1 X Adjustable Tap Wrench (M6 to M20 - 1/4" to 3/4"). 1 X Long Handle Adjustable Tap Wrench (M3 to M12 - 1/16" to 1/2").

1 X T-Handle Tap Wrench. 1 X Die Handle (M25 - 1). 1 X Long Die Handle (M38 - 1-1/2). 1 X Screw Pitch Gauge Metric. 1 X Screw Pitch Gauge SAE. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders.

Caifornia Warehouse: 18501 Arenth Ave, City of Indus-try, CA 91748. 300 W Airtex Blvd, Suite 200, Houston, TX 77090.

2125 Gateway Blvd, Hebron, KY 41048. 1000 High Street, Perth Amboy, NJ 08861. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return.

All emails will be responded to within. Special circumstances will be listed clearly in the listing.

Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's your fault. A: The item ships from Rancho Cucamonga, CA, United States. A: Please log on your account. Q: How do I return an item?

Please contact our customer service before you return an item. The item "86PC Tap And Die Combination Set Tungsten Steel Titanium SAE METRIC Tools HQ" is in sale since Monday, November 27, 2017.

This item is in the category "Home & Garden\Tools & Workshop Equipment\Hand Tools\Taps & Dies". The seller is "ganfeii1_4" and is located in Houston, Texas. This item can be shipped worldwide.

Number of Pieces: 86pc
Type: Tap & Die Set
MPN: FGFDG009
Brand: VEVOR
Country/Region of Manufacture: China
Material: Tungstem Steel
Bundle Listing: As the Description shows
Tap And Die set: Titanium
System of Measurement: Metric