GEARWRENCH 3887 77 Piece Ratcheting Tap and Die Set, SAE/Metric New

GEARWRENCH 3887 77 Piece Ratcheting Tap and Die Set, SAE/Metric New! GearWrench has taken the ratcheting wrench design and applied it to the tap and die application with the GearWrench 77 pc. The Twist Lock guide system utilized by the tap and die set reduces the walk back of the die guide and keeps the dies centered while cutting. The die adapters in the tap and die set work with the 3/8 in. Drive Pass-Thru ratchet and socket system.

The blow mold carrying case with tilted tap holders securely stores and keeps the tape and die set organized. Tap and die set contains: one medium ratcheting T wrench, one small tap adapter, one medium tap adapter, one medium hex die adapter, 18 taper taps: 4 x 40; 6 x 32; 8 x 32; 10 x 24; 10 x 32; 12 x 24; 1/4 x 20; 1/4 x 28; 5/16 x 18; 5/16 x 24; 3/8 x 16; 3/8 x 24; 7/16 x 14; 7/16 x 20; 1/2 x 13; 1/2 x 20; 3mm x 0.50; 3mm x 0.60; 4mm x 0.70; 4mm x 0.75; 5mm x 0.80; 5mm x 0.90; 6mm x 1; 7mm x 1, 14 plug taps: 3/8 x 16; 3/8 x 24; 7/16 x 14; 7/16 x 20; 1/2 x 13; 1/2 x 20; 8mm x 1.25; 9mm x 1; 9mm x 1.25; 10mm x 1.25; 10mm x 1.50; 11mm x 1.50; 12mm x 1.50; 12mm x 1.75, one BSP tap: 1/8 - 28, one NPT tap: 1/8 - 27, 34 hex dies: 4 x 40; 6 x 32; 8 x 32; 10 x 24; 10 x 32; 12 x 24; 1/4 x 20; 1/4 x 28; 5/16 x 18; 5/16 x 24; 3/8 x 16; 3/8 x 24; 7/16 x 14; 7/16 x 20; 1/2 x 13; 1/2 x 20; 3mm x 0.50; 3mm x 0.60; 4mm x 0.70; 4mm x 0.75; 5mm x 0.80; 5mm x 0.90; 6mm x 1; 7mm 1; 8mm x 1.25; 9mm x 1; 9mm x 1.25; 10mm x 1.25; 10mm x 1.50; 11mm x 1.50; 12mm x 1.50; 12mm x 1.75; 1/8 - 27; 1/8 - 28. Ratcheting T-handles in the tap and die set wind dies with a 5 deg swing arc and have a reversing lever to eliminate hand-over-hand turning. Twist Lock guide system reduces the walk back of the die guide and keeps the dies centered while cutting. Die adapters work with the 3/8 in. Drive Pass-Thru ratchet and socket system as well as socket accessories. Drive extension adapters provide greater access in confined areas when used with 3/8 in.

Blow mold carrying case with tilted tap holders for easy access and secure storage of the tap and die set. Die adapter works on round and hex shaped dies.

Auto-locking feature allow the tap adapters in the tap and die set to be removed safely. Spring-loaded cap allows for quick release of large tap adapter.