GEARWRENCH 77 Piece SAE/Metric Ratcheting Tap and Die Set -3887

Die adapter works on round and hex shaped dies. Ratcheting T-handles wind dies with a 5° swing arc and have a reversing lever to eliminate hand-over-hand turning. Twist Lock guide system reduces the "walk back" of the die guide and keeps the dies centered while cutting. (18) Taper Taps: 4 x 40, 6 x 32, 8 x 32, 10 x 24, 10 x 32, 12 x 24, 1/4 x 20, 1/4 x 28, 5/16 x 18, 5/16 x 24, 3mm x 0.50, 3mm x 0.60, 4mm x 0.70, 4mm x 0.75, 5mm x 0.80, 5mm x 0.90, 6mm x 1.00, 7mm x 1.00 (14) Plug Taps: 3/8 x 16, 3/8 x 24, 7/16 x 14, 7/16 x 20, 1/2 x 13, 1/2 x 20, 8mm x 1.25, 9mm x 1.00, 9mm x 1.25, 10mm x 1.25, 10mm x 1.50, 11mm x 1.50, 12 x 1.50, 12mm x 1.75 (2) Pipe Taps: 1/8 -28 and 1/8 - 27 (34) Hex Dies: 4 x 40, 6 x 32, 8 x 32, 10 x 24, 10 x 32, 12 x 24, 1/4 x 20, 1/4 x 28, 5/16 x 18, 5/16 x 24, 3/8 x 16, 3/8 x 24, 7/16 x 14, 7/16 x 20, 1/2 x 13, 3mm x 0.50, 3mm x 0.60, 4mm x 0.70, 4mm x 0.75, 5mm x 0.80, 5mm x 0.90, 6mm x 1.00, 7mm x 1.00, 8mm x 1.25, 9mm x 1.00, 9mm x 1.25, 10mm x 1.25, x 10mm x 1.50, 11mm x 1.50, 12mm x 1.50, 12mm x 1.75, 1/8 -28, 1/8 -27 (1) Medium ratcheting T-wrench (2) Tap Adapters - Small and Medium (1) Medium Hex Die Adapter (1) Sliding Handle for Tap Adapter (1) 4mm hex key (2) Thread pitch gauges - SAE and Metric (1) Hex die spacer.