Taps & dies sizes: M2X0.4, M3X0.5, M4X0.7, M5X0.8, M6X1, M6X0.75, M7X1, M7X0.75, M8X1.25, M8X1, M8X0.75, M9X1.25, M9X1, M9X0.75, M10X1.5, M10X1.25, M10X1, M10X0.75, M11X1.5, M11X1.25, M11X1, M11X0.75, M12X1.75, M12X1.5, M12X1.25, M12X1, M12X0.75, M14X2, M14X1.5, M14X1.25, M14X1, M16X2, M16X1.5, M16X1 and M18X1.5. Tungsten steel taps with high-hardness can stand high temperatures and corrosion durable enough for your long-lasting use. Fully ground tap is super-sharp enough to ensure its smooth chip-removing & tapping without fracturing.
A lock hole on dies is to ensure its double stability when screwing it on. An adjustable top wrench is for you to adjust tap size freely. The broad range of sizes and thread pitch, a total of 110 pieces to meet your different requirements. It is extensively used in many fields like machine tools, precision modules, transformers, etc. 2 x Tap holders (different size).
1 x T- bar tap wrench. 2 x Die holder (different size).
1 x Portable Storage Case. 110-Piece Tap and Die Set. Our durable and reliable 110-piece tap and die set includes Metric coarse and fine sizes, super-hard & high-precision, and can offer you excellent performance in applications like machine tools, precision modules, transformers, etc. ENGINEERING TAP AND DIE SET.M3 - M12 (1/16" - 1/2"). M6 - M20 (1/4" - 3/4"). Total length 200mm (1 diameter bore). Total length 270mm (1 1/2 diameter bore). 35 x Taper taps (M2-M18); 35 x Plug taps(M2-M18). 26 x Taps;1 x NPT Tap (1/8-27).
26 x Dies;1 x NPT Die (1/8-27). 1 x Long Handle Adjustable Tap holders : M3 - M12 (1/16" - 1/2") ; 1 x Adjustable Tap holders : M6 - M20 (1/4" - 3/4"). 1 x Tap Wrench (M4-M12).
1 x Long Handle Adjustable Tap Wrench: M3 - M12 (1/16" - 1/2") 1 x Adjustable Tap Wrench: M6 - M20 (1/4" - 3/4"). 1 x Die Handle(M25 - 1"); 1 x Long Die Holder(M38 - 1-1/2").1 x Die Handle (M25 - 1). 1 x Die Handle (M25 - 1") 1 x Long Die Handle (M38 - 1-1/2"). 1 x T- bar Tap Wrench. 1 x T- bar tap wrench (M3-M6); 1 x Screwdriver; 2 x Screw Pitch Gauge(Metric&SAE). 1 x T-Handle Tap Wrench; 1 x Screwdriver; 2 x Screw Pitch Gauge(Metric&SAE). 18.5 x 13.8 x 2.8 inches. We are not responsible for undeliverable addresses. Your feedback very important to us, after you get your package and you are.
If you have any problem with your order / any questions please before leave any type of feedback. Thank you for shopping at our store.