Hardened Alloy Steel Metric Tap and Die Rethreading Tool Set Cutting 110PCS
Hardened Alloy Steel Metric Tap and Die Rethreading Tool Set - Cutting 110PCS. Steel is the base metal used in the construction of these sets - but not all steel is created equally! Look for steel alloy or, even better, Titanium tipped cutting surfaces. The better the metal the tougher the tap and die so they so they can cut into more materials and they will stay sharper for longer.
35 Taper Taps + 35 Plug Taps + 35 Dies + 2 Tap Wrench M3-M12, M6-M20 + 1 Die Holder 25mm, 38mm O/D + 1 T-Type Tap Wrench M3-M6. Tap and die set size? M2 x 0.4, M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 0.75, M6 x 1, M7 x 0.75, M7 x 1, M8 x 0.75, M8 x 1, M8 x 1.25, M9 x 0.75, M9 x 1, M9 x 1.25, M10 x 0.75, M10 x 1, M10 x 1.25, M10 x 1.5, M11 x 0.75, M11 x 1, M11 x 1.25, M11 x 1.5, M12 x 0.75, M12 x 1, M12 x 1.25, M12 x 1.5, M12 x 1.75, M14 x 1, M14 x 1.25, M14 x 1.5, M14 x 2, M16 x 1, M16 x 1.5, M16 x 2, M18 x 1.5? Constructed from hardened alloy steel for maximum strength, durability and longevity.
Heavy-duty plastic blow-molded carrying case for easy transport, safe storage & quick organization. Tapered teeth design to start threading easily and smoothly and prevent overthreading.
Suitable for the repair of new threads or damaged threads on most metals such as carbon steel, cast iron, aluminum, brass, copper and stainless steel. 110PCS Tap and Die Set:SAE DIE SIZES:1/4-20; 1/4-24; 1/4-28; 5/16-18; 5/16-24; 3/8-16; 3/8-24; 7/16-14; 7/16-20; 1/2-16; 1/2-20; 9/16-8; 5/8-11; 9/16-12; 3/4-10; 3/4-16; 5/8-18 METRIC DIE SIZES: 6X1.0; 8X1.25; 10X1.5; 10X1.0; 11X1.5; 1/8-27NPT; 1/4-18NPT; 12X1.75; 12X1.25; 14X1.25; 18X1.5 SAE TAP SIZES: 3/4-10; 3/4-10; 3/4-16; 5/8-18; 1/4X18NPT; 1/8-27NPT; 5/16-24; 5/16-18; 1/4-32; 1/4-24; 1/4-28; 1/4-20; 7/16-20; 1/2-13; 1/2-20; 9/16-12; 9/16-18; 5/8-11; 3/8-16; 3/8-24; 7/16-14; METRIC TAP SIZES; 18X1.5; 14X1.25; 6X1.0; 12-24; 10-32; 6-32; 4-40; 12X1.25; 12X1.75; 8X1.25; 10X1.5; 10X1; 11X1.6; 8-32; 10-24 Package List: 2 x tap holders (different size) 1 x T- bar tap wrench 2 x Die holder (different size) 35x2 taps 35 x dies 1 x Portable Storage CaseMaterial -------Bearing Steel:1. Low carbon steel: 0.05 to 0.25% carbon content, Which has a relatively low tensile strength, but it is cheap and easy to form. Bearing Steel: usually used for ball bearing, Very strong, good abrasion performance.
Perfect for tap and die set. High Speed Steel: HSS is a tool steel with high hardness, high wear resistance and high heat resistance. But the prime cost is very high. As our valued customer, we will do our best to make sure the product you receive arrives to you on time and as expected.This item is in the category "Home & Garden\Tools & Workshop Equipment\Hand Tools\Taps & Dies". The seller is "yellow_yt" and is located in this country: US. This item can be shipped worldwide.