Head tap: shallow thread tap, for first tapping Two cone: deep thread tap, used to consolidate tapping. Use the shallow thread tap first, and then use the deep thread tap. The thread is clear and applicable to most metal materials, hard plastics, wood, etc. Wide range of applications: metal materials, hard plastics, wood and other materials. Alloy tool steel has good processing performance, good strength and toughness, so it is mainly used to manufacture complex thin cutting edges and impact resistant metal cutting tools, and also has higher processing performance.When tapping, first insert the head tap to make the tap centerline consistent with the drilling centerline. Both hands rotate evenly and apply a little pressure to feed the tap. No pressure is needed after feeding. Each time the tap is rotated, it reverses about 45 degrees to cut off the cutting, so as to avoid blocking. If the tap is difficult to rotate, do not increase the rotation force, otherwise the tap will break. Package Include : According to your choose. (Except some countries and APO/FPO). Service transit time is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday. We care about our valued buyers, if you have any questions, our customer service staffs will be very glad to help you. We try our best to reply to your emails as soon as possible, however, due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. Feedback is very important to us.
This item is in the category "Home & Garden\Tools & Workshop Equipment\Hand Tools\Taps & Dies". The seller is "ce10wy" and is located in this country: CN. This item can be shipped worldwide.