The range of this set is from 2.00mm down to 0.7mm for threading wire or re-threading stripped threads on screws. A handy economical Tap & Die set, made in India. Set can be used to thread wire, for re-threading of stripped threads on screws, earring backs and watch repair parts.
Screw-plate (Die) is used for threading wire or making your own screws, while the individual taps are used with a pin vise. Always use a cutting fluid when using the Taps and Plate/Die, turn a few threads and reverse slightly to remove the metals that have been cut. The proper use will ensure the taps and die-plate to last longer.JETS Product # 2009-761 + 2203-274. Item is New never Used. Range: 0.7 - 2.0 mm.
SCREW-PLATE Range 0.7-2.0mm. Pin Vise: 4 - Hold Taps and other uses. The item "MINI TAP AND DIE SET 14 TAPS & SCREWPLATE & PIN VISE SET 0.7-2mm JEWELRY MAKING" is in sale since Monday, May 05, 2014. This item is in the category "Jewelry & Watches\Jewelry Design & Repair\Jewelry Tools\Other Jewelry Tools". The seller is "jetstools" and is located in North Hollywood, California.
This item can be shipped worldwide.