New Home DIY Tools 77 Piece Ratcheting Tap and Die Set, SAE/Metric 3887

Die adapter works on round and hex shaped dies. Ratcheting T-handles wind dies with a 5° swing arc and have a reversing lever to eliminate hand-over-hand turning. Twist lock guide system reduces the "walk back" of the die guide and keeps the dies centered while cutting. Die adapters work with the 3/8inch Drive pass-thru ratchet and socket system as well as socket accessories.

Auto-locking feature allow the tap adapters to be removed safely. Spring-loaded cap allows for quick release of large tap adapter. Drive extension adapters provide greater access in confined areas when used with 3/8inch Drive extensions.

CHOKING HAZARD -- Small parts. Not for children under 3 yrs. CHOKING HAZARD -- Toy contains a marble. CHOKING HAZARD -- This toy is a marble. CHOKING HAZARD -- Children under 8 yrs.

Can choke or suffocate on uninflated or broken balloons. Keep uninflated balloons from children. Discard broken balloons at once. CHOKING HAZARD -- Toy contains a small ball. CHOKING HAZARD -- This toy is a small ball. What's in the box. (18) Taper Taps: 4 x 40, 6 x 32, 8 x 32, 10 x 24, 10 x 32, 12 x 24, 1/4 x 20, 1/4 x 28, 5/16 x 18, 5/16 x 24, 3mm x 0.50, 3mm x 0.60, 4mm x 0.70, 4mm x 0.75, 5mm x 0.80, 5mm x 0.90, 6mm x 1.00, 7mm x 1.00 (14) Plug Taps: 3/8 x 16, 3/8 x 24, 7/16 x 14, 7/16 x 20, 1/2 x 13, 1/2 x 20, 8mm x 1.25, 9mm x 1.00, 9mm x 1.25, 10mm x 1.25, 10mm x 1.50, 11mm x 1.50, 12 x 1.50, 12mm x 1.75 (2) Pipe Taps: 1/8 -28 and 1/8 - 27. (34) Hex Dies: 4 x 40, 6 x 32, 8 x 32, 10 x 24, 10 x 32, 12 x 24, 1/4 x 20, 1/4 x 28, 5/16 x 18, 5/16 x 24, 3/8 x 16, 3/8 x 24, 7/16 x 14, 7/16 x 20, 1/2 x 13, 3mm x 0.50, 3mm x 0.60, 4mm x 0.70, 4mm x 0.75, 5mm x 0.80, 5mm x 0.90, 6mm x 1.00, 7mm x 1.00, 8mm x 1.25, 9mm x 1.00, 9mm x 1.25, 10mm x 1.25, x 10mm x 1.50, 11mm x 1.50, 12mm x 1.50, 12mm x 1.75, 1/8 -28, 1/8 -27. (1) Medium ratcheting T-wrench (2) Tap Adapters - Small and Medium (1) Medium Hex Die Adapter (1) Sliding Handle for Tap Adapter (1) 4mm hex key (2) Thread pitch gauges - SAE and Metric (1) Hex die spacer. This item is in the category "Home & Garden\Tools & Workshop Equipment\Hand Tools\Taps & Dies". The seller is "yu_84202" and is located in this country: US. This item can be shipped to United States.

• Brand: Unbranded
• Type: Tap & Die Set
• System of Measurement: Metric/Standard
• Color: Picture Color