SAE/Metric Ratcheting Tap and Die Set (77-Piece)

SAE/Metric Ratcheting Tap and Die Set (77-Piece). Includes SAE and Metric Taps and Dies. Die adapter works on hex-shaped and round dies. Ratcheting T-handles only need a 5° swing arc. Husky has taken the ratcheting wrench design and applied it to the tap and die application. The ratcheting handles and adapters allow for easy back-and-forth movement that's required while cutting threads on either taps or dies. The 5-degree ratcheting arc with a reversing lever eliminates the hand-over-hand turning of the T-handle wrench. The hex die adapters work on either round or hex-shaped dies. Set includes a 72-tooth ratcheting T-handle, a sliding T-adapter, 34 hex dies, 34 taps, 2 pitch gauges (SAE & Metric), small tap adapter 0.11-0.191 in. , medium tap adapter 0.219-0.280 in. , 2 die adapters and a 4 mm hex key. Hex Dies include SAE sizes 4x40, 6x32, 10x32, 8x32, 10x24, 12x24, 1/8x27, 1/8x28, 1/4x20, 1/4x28, 5/16x18, 5/16x24, 3/8x16, 3/8x24, 7/16x14, 7/16x20, 1/2x13 and 1/2x20.

Also includes Metric sizes M3x. 05, M3x0.6, M4x0.7, M4x0.75, M5x0.8, M5x0.9, M6x1, M7x1, M8x1.25, M9x1, M9x1.25, M10x1.25, M10x1.5, M11x1.5, M12x1.5 and M12x1.75. Taps include SAE sizes 4x40, 6x32, 10x32, 8x32, 10x24, 12x24, 1/8x27, 1/8x28, 1/4x20, 1/4x28, 5/16x18, 5/16x24, 3/8x16, 3/8x24, 7/16x14, 7/16x20, 1/2x13 and 1/2x20.

Set Includes both British Standard Pipe (BSP) and National Pipe Thread (NPT) Taps and Dies. Set Includes both National Coarse (NC) and National Fine (NF) Taps and Dies. Set Includes both Taper and Plug Style Taps. Ratcheting T-handles allow a 5-degree swing arc and have a reversing lever, eliminating hand-over-hand turning. Twist lock guide system reduces walk-back of the die guide and stays centered while cutting.

Die adapters work with the 3/8 in. Drive pass-thru ratchet and socket system as well as socket accessories. Spring-loaded cap allows for quick-release of large tap adapter. Blow mold carrying case with tilted tap holders for easy access and secure storage.