Snap-On TD-2425 STANDARD / FRACTIONAL TAP AND DIE SET ESTATE ITEM

Snap-On TD-2425 STANDARD / FRACTIONAL TAP AND DIE SET ESTATE ITEM
Snap-On TD-2425 STANDARD / FRACTIONAL TAP AND DIE SET ESTATE ITEM
Snap-On TD-2425 STANDARD / FRACTIONAL TAP AND DIE SET ESTATE ITEM

Snap-On TD-2425 STANDARD / FRACTIONAL TAP AND DIE SET ESTATE ITEM
41 Piece Used Tap & Die Set. Result of Estate - Found Model # By Comparing Other Sets On E-Bay Not 100% Sure I Picked The Right Model! Also Has A Chart Tucked Into The Cover - Not Sure If It Came With It or If The Previous Owner Put It In.

Detailed Listing Below - If You Need More Info, Just Send A Message To Me & I'll Be Happy To Try and Answer! 3 Items Right At The Start - Slot On Top Tray Very Top Right Hand Side The Slot Is Empty - Missing One Piece. Top tray - Left Side - 4th Drill Down - Rimac 12 - 24 No Appears to Have Top of Drill Broken Off Slightly. Top Tray Has Different Manufacturers Names On The Taps - Info Listed Below Bottom Tray All Say Rimac With The Exception of One Piece (See Below).

Please Note: I Did Notice That The Other Pictures On E-Bay Have The Model Number Right In The Middle of The Top Tray - This One Is Blank. Bottom Of The Case Containing the Almost Round Die's? - They Are All Rimac Items With The Exception of One, Will Identify Below. Sizes: 12-24: 8-32: 4-36 or 4-56: 6-32: 10-32: 10-24:7/16 - 20: 5/16 - 18 (that's the 8 0n b0ttom row). Sizes: 7/16 - 14: 1/2 - 20: 3/8 - 16 (three in middle row).

Sizes: 1/4-20: 1/4 - 28: 1/2 - 13: 5/16 - 24: 1/8 - Pipe (doesn't say Rimac): 3/8 - 24 (top row - 6 pieces). Top Tray - With The Tap Sets? - Some Are Hard To Read - Did The Best I Could To Identify.

Names & Sizes on The Left Side Working My Way Down Towards The Larger Taps. Top Doesn't Seem As Pointed as First 3 Listed - Broken? Readit 3/8-16 (use Drill 5/16).

Rimac Guage - One Side 10-11-12-13-14-16-18 / Other Side = 20-24-27-28-32-36-40. Top Slot - Missing Piece. Rimac 7/16-20 looks like N. Handle at Top of Tray Shows Rimac.

Don't See A Name On The Smaller Hand Turning Tool Located in Bottom Right Hand Corner of Tray. The item "Snap-On TD-2425 STANDARD / FRACTIONAL TAP AND DIE SET ESTATE ITEM" is in sale since Sunday, March 11, 2018. This item is in the category "eBay Motors\Automotive Tools & Supplies\Hand Tools\Threading Tools". The seller is "cruzin1996" and is located in Manchester, New Hampshire. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion.
Snap-On TD-2425 STANDARD / FRACTIONAL TAP AND DIE SET ESTATE ITEM


Tap And Die Set   Links   Contact Us   Privacy Policy   Terms of Use